1
WAR Hardware Support / Re: Blow Through MAF Trouble shooting
« on: October 06, 2014, 10:56:01 AM »
Ok guys... I have litterally done everything, it must be a tuning issue so i need your help.
Whats been done:
1. New MAF/o2/coolat temp/fuel pressure regulator
2. Replaced ICV hoses and epoxied in plug of s50 manifold
3. smoke/uv test - 0 leaks anywhere
4. Charge pipe redone to allow for 6+ in. of 3" strait pipe before MAF.
5. Swapped DME's
So after all that we are still getting only .5X v at idle and it is idling at 10.0 afr. Only code being thrown is a 1222. What else can we do to fix the idle? I'm seriously lost now and out of ideas. PLEASE HELP!
Whats been done:
1. New MAF/o2/coolat temp/fuel pressure regulator
2. Replaced ICV hoses and epoxied in plug of s50 manifold
3. smoke/uv test - 0 leaks anywhere
4. Charge pipe redone to allow for 6+ in. of 3" strait pipe before MAF.
5. Swapped DME's
So after all that we are still getting only .5X v at idle and it is idling at 10.0 afr. Only code being thrown is a 1222. What else can we do to fix the idle? I'm seriously lost now and out of ideas. PLEASE HELP!