War Chip Forums

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Anti-Theft integration  (Read 14494 times)

ZesCoupe

  • Newbie
  • *
  • Karma: +0/-0
  • Posts: 2
  • Car: e24 635CSi
    • View Profile
Anti-Theft integration
« on: February 08, 2015, 05:37:53 AM »
Hi,

In the installation instructions it suggests that the spare black wire is for optional anti-theft integration. Has anybody used this and what does the connection to the chip do?
Logged

millerperformance

  • Administrator
  • Full Member
  • *****
  • Karma: +4/-0
  • Posts: 186
  • Car: The WAR Machine
    • View Profile
Re: Anti-Theft integration
« Reply #1 on: February 09, 2015, 09:40:29 PM »
That wire is to be tied into a triggered ground via the alarm. When that wire is grounded, the ECU is disabled. It interrupts the signal from the chip and without the data for the car to run, it will not start, cannot start and will never run unless that ground is removed or deactivated.
Logged

Pistons & Rods | MAF Conversions | Cams | Tuning Packages | Contact | Facebook

ZesCoupe

  • Newbie
  • *
  • Karma: +0/-0
  • Posts: 2
  • Car: e24 635CSi
    • View Profile
Re: Anti-Theft integration
« Reply #2 on: February 13, 2015, 10:59:26 AM »
Ok - thanks for the reply. Now I know what it does it should fit in nicely with new alarm I'm installing. On the list of 'to do' this winter.
Logged