War Chip Forums

General => Turbo Tuning => Topic started by: bry195 on March 26, 2014, 06:10:46 AM

Title: open issues that I need help with
Post by: bry195 on March 26, 2014, 06:10:46 AM

1-launch control doe not work and rev limit only works above 0 ground speed

2-1216 TPS error? any progress?

Title: Re: open issues that I need help with
Post by: Alameer on March 27, 2014, 09:00:18 AM

since you're saying that launch control is not working that means that you're running either 413 or 506 ECU.
did you follow the instructions on how to enable launch control mode?
please provide us with more details in order to be of more help.
please take screenshots of the launch control and RPM limit pages if possible.

Title: Re: open issues that I need help with
Post by: bry195 on March 27, 2014, 07:05:56 PM

413, I followed all directions to enable. the problem is that if I look at the DME through it shows 26mph but if I look at the signals from the sensor in the dif its 0 and if I look at the wheel speed sensors for abs it says 0.

launch control does not work becasue its waiting for 0 speed to enable. rev limit on works above the 26mph speed the dme sees. I suspect the DME or the chip.

Title: Re: open issues that I need help with
Post by: millerperformance on March 28, 2014, 04:00:14 PM

Nothing new on the 1216 front yet. Email us your tune where you have LC activated so we can look at it.