1
WAR Software Support / no start issues
« on: July 19, 2014, 06:25:38 PM »
i recently installed the war chip as the directions instructed, i had a few problems getting a base tune on the chip but i was able to download them here from the forum. i installed the (s50 s52 3-5 Inch MAF 24# injectors w cams) on the chip, when i tried cranking over for the first time it would just keep cranking and cranking. i had a cylinder fire every once in a while but not enough to get her going. so i grabbed a few friends and we all push started it and it ran fine. i pulled it back into the driveway shut it down and tried again still cranks no start. i could smell fuel coming from the exhaust pipe so i know the injectors are firing and because we were able to get it to push start i know i have spark. so i tried messing with the idle fuel and ignition maps but to no avail, she still cranks her heart out but no start. my current setup is an s50us with 24# injectors euro maf and shcrick cams 272/280. im not the best with software but if one of you could give me a hint in the right direction i believe i would be able to get this lazy old sow off her rump and back on the road! thank you for your time and responses! help is much appreciated!