War Chip Forums

General => General Discussion => Topic started by: hayta on March 25, 2014, 03:06:05 AM

Title: Is There A Way to Convert binaries to mpc Files
Post by: hayta on March 25, 2014, 03:06:05 AM

Hi there,

I have a Dinan chip for 179 ECU which was very successful. It has a great ignition map that really wakens the M30B35 up. I want to copy it's ignition map to my turbo fw (ofcourse with some modifications that will prevent detonation).

So the question is; is there a way to convert this bin file to war chip mpc file?


Thanks for helping in advance.

Title: Re: Is There A Way to Convert binaries to mpc Files
Post by: Alameer on March 27, 2014, 09:15:14 AM

from my very humble experience... NA tunes are not healthy for Turbo engines, as the NA tunes advance the timing to get the power, while turbo tunes retard the timing to get the power and safety to the engine.

i could be wrong and would appreciate it if someone can confirm or deny what i just mentioned above.

Title: Re: Is There A Way to Convert binaries to mpc Files
Post by: hayta on March 27, 2014, 11:29:07 AM

Actually that's not what I'm questioning. Of course I'll retard the boosted side of the map.

Anyway, I found the answer by myself. Just open the .bin file with war chip software. This much simple.

Title: Re: Is There A Way to Convert binaries to mpc Files
Post by: millerperformance on April 07, 2014, 09:25:04 AM

Yes, you can open a bin file into our software. However, you can't make an MPC back to a bin. Also, make sure you have the same software version as the one we use for the WAR Chip. You will know if you have a different version because the maps will have numbers that don't make sense. If you are using the same version, the maps will be displayed as usual.