War Chip Forums

General => Turbo Tuning => Topic started by: sao_crx on August 01, 2014, 02:44:54 PM

Title: 325 m50 GT35 BUILD
Post by: sao_crx on August 01, 2014, 02:44:54 PM

Hi!

We are triying to startup our BMW 325 GT35 turbo M50 setup
(https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xpf1/t31.0-8/10256410_706107516128344_2886333472796590953_o.jpg)
we are using the WAR chip kit + MAF + big injectors suplied,

First of all wen we recieved the miller chip we installed the NA maps and with low fuel press the car was starting an revving healty
this is the video of our first start:
http://youtu.be/7JXG86tQxMA?list=UU2Os85ftjPr_ZTal8gr3h6Q (http://youtu.be/7JXG86tQxMA?list=UU2Os85ftjPr_ZTal8gr3h6Q)
 we had problems with the usb cable so we dont want to test drive the car until we recive the new usb cable from miller ( super quick! thanks!) and load the turbo maps!, the problem is this week we recieved the new usb cable and base map + .ecu turbo  files and the car is not working properly, :'(
Any idea about what are we doing wrong?

We installed the war chip and  uploaded the blow maps to the ecu

(https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/v/t34.0-12/10595792_10152573741295792_350924021_n.jpg?oh=e4d8e7c54c994d940865649a59be0d89&oe=53DDC795&__gda__=1407053409_1cc8ac1636696adf610f8afcee201f0f)

this is what you can see if you plug in the USB  cable:

(https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/v/t34.0-12/10592335_10152573741355792_45270111_n.jpg?oh=0c79ace8604639a6f9b26d0952b7fcf7&oe=53DD98D0&__gda__=1407059008_f1b030198be3c8a288033ccfe2942c46)

if we depress the throtle pedal the car is not revving up and it goes full lean! with 3,5 bar fuel press and a wallbro 255 fuel pump, any ideas?

video with blow map triying to rev up the engine:
https://www.youtube.com/watch?v=XnoxwT_gEBk&feature=youtu.be (https://www.youtube.com/watch?v=XnoxwT_gEBk&feature=youtu.be)

m13 ecu + win XP english version PC. The map selector knob is not conected  and we are loading un the 4 slots the same turbo map.

thanks in advance!

Title: Re: 325 m50 GT35 BUILD
Post by: sao_crx on August 02, 2014, 05:18:47 AM

 :) we Found today The fault ! Stupid and simple hardware one! mAF conector was popped out ! Any advise for The first test drivers ? Wich Air fuel ratio should we expect At idle cruise and WOT ?


Thanks!