War Chip Forums

General => General Discussion => Topic started by: doug.wardell@gmail.com on December 18, 2015, 12:53:12 PM

Title: Bosch 413 - Deleting Vehicle Speed input
Post by: doug.wardell@gmail.com on December 18, 2015, 12:53:12 PM
I have an M50 in my E30 race car, but since I no longer have the stock dash I am not feeding the vehicle speed (from the diff sensor) thru the dash and then into the DME.

As I understand it the dash does something to the signal, so I can't run the signal right into the engine harness from the diff.

I've been told that most tuners can remove the requirement for this input. Is the WAR chip software capable of eliminating the need for this input to the DME?

Thanks.