War Chip Forums

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: 325 m50 GT35 BUILD  (Read 6391 times)

sao_crx

  • Newbie
  • *
  • Karma: +0/-0
  • Posts: 3
  • Car: M50 GT35R
    • View Profile
325 m50 GT35 BUILD
« on: August 01, 2014, 02:44:54 PM »

Hi!

We are triying to startup our BMW 325 GT35 turbo M50 setup

we are using the WAR chip kit + MAF + big injectors suplied,

First of all wen we recieved the miller chip we installed the NA maps and with low fuel press the car was starting an revving healty
this is the video of our first start:
http://youtu.be/7JXG86tQxMA?list=UU2Os85ftjPr_ZTal8gr3h6Q
 we had problems with the usb cable so we dont want to test drive the car until we recive the new usb cable from miller ( super quick! thanks!) and load the turbo maps!, the problem is this week we recieved the new usb cable and base map + .ecu turbo  files and the car is not working properly, :'(
Any idea about what are we doing wrong?

We installed the war chip and  uploaded the blow maps to the ecu



this is what you can see if you plug in the USB  cable:



if we depress the throtle pedal the car is not revving up and it goes full lean! with 3,5 bar fuel press and a wallbro 255 fuel pump, any ideas?

video with blow map triying to rev up the engine:
https://www.youtube.com/watch?v=XnoxwT_gEBk&feature=youtu.be

m13 ecu + win XP english version PC. The map selector knob is not conected  and we are loading un the 4 slots the same turbo map.

thanks in advance!
« Last Edit: August 01, 2014, 03:28:11 PM by sao_crx »
Logged

sao_crx

  • Newbie
  • *
  • Karma: +0/-0
  • Posts: 3
  • Car: M50 GT35R
    • View Profile
Re: 325 m50 GT35 BUILD
« Reply #1 on: August 02, 2014, 05:18:47 AM »

 :) we Found today The fault ! Stupid and simple hardware one! mAF conector was popped out ! Any advise for The first test drivers ? Wich Air fuel ratio should we expect At idle cruise and WOT ?


Thanks!
Logged